Lock to lock the message. Locked messages will not be erased automatically. To unlock the message, select Unlock and press .

Font Size to change the font size from Small or Normal.

Save to Ph. Book to save the phone number, email address, and URLs. Select a data category and press to save.

Go to Phone Book to go to the Contacts list (if applicable).

Compose New to compose a new message. (See page 166 to compose a message.)

Erase to erase the message.

Changing the Display Font Size of a Message

After you display a Message in the Inbox, Sent, or your defined folder, press Options (right softkey) to display message options.

To adjust the display font size:

1.Select Font Size and press .

2.Select Small or Normal and press .

Prepending a Phone Number From a Message

After you display a Message in the Inbox, Sent, or your defined folder, press Options (right softkey) to display message options.

To add a prefix to a phone number:

1.Select Prepend and press .

2.Highlight your desired phone number and press or OK (left softkey).

3.Enter the digits or pauses (see below) you want to add to the number. If you want to save the number, press and select the Save Phone# option. If not, the changes only apply to the

current call.

4.To select an option, highlight it and press .

Call to dial the phone number.

Call:Speaker On to dial the phone number in speakerphone mode.

Save Phone# to store the phone number in your Contacts Directory.

H Hard Pause to insert a hard pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 27.)

T 2-Sec. Pause to insert a 2-second pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 27.)

Section 3B: PCS Vision

170

Page 181
Image 181
Sanyo RL7300 manual Changing the Display Font Size of a Message, Prepending a Phone Number From a Message, PCS Vision 170