Sanyo RL7300 Making a PCS Ready Link Call (Group Call)

4. Continue holding as you speak.When you are finished
speaking,release the Ready Link (Memo)button to allow other
contacts to speak.(When the other party takes the floor,you
will see the speaker’s name and phone number and the text
“has floor.”)
5. When you are finished,press .
Note:When neither party has the floor during a PCS Ready Link call,
“Floor is open.” appears on the display. If no one takes the floor for 20 seconds,
the PCS Ready Link call ends automatically.
Tip:If you press or during step 3 on the previous page, you can make
a standard voice call.
Making a PCS Ready Link Call (Group Call)
You can make a PCS Ready Link call to all members in a Group entry,
which you have in your PCS Ready Link List.You can communicate
with up to five members at a time.
To place a PCS Ready Link Group Call:
1. Press R-Link(left softkey)or press to access the PCS Ready
Link List.
2. Press Go to(left softkey),highlight the list from which you want
to make a Group call (Co. Groupsor Per. Groups),and press .
3. Highlight the group you want to call,and press and hold to
place the call and take the floor.(You will see R-Link calling...and
Connecting...followed by “You have floor.”Continue with the
PCS Ready Link call as described above.)
To display a group member’s details,press ,highlight
your desired group member,then press View(left softkey)
during step 3 above.Press to make a PCS Ready Link
call to the member.
If one of the group members takes the floor,you will see the
member’s name and PCS Ready Link number on the display.
The phone beeps if you press the Ready Link (Memo)
button when another contact has the floor.
4. When the call is finished,press .
Tip:You can also make a Group Call after checking the group member. Press
to display group members, highlight <Call Group>and press and hold
during step 3 above.
Section 2J: Using PCS Ready Link 131