
Preparation
Mounting the unit on a tripod | Attaching the viewfinder and |
Use the tripod attachment to mount the unit on a tripod. | microphone |
| |
1 Mount the tripod attachment on the tripod. | For details on the attachment and adjustments of the viewfinder and |
microphone, refer to the operating instructions of the viewfinder. | |
Tripod attachment |
|
Tripod head
<Note>
Take account of the centre of gravity of the unit and that of the tripod attachment when selecting the attachment hole. Check that the diameter of the hole selected matches the diameter of the tripod head screw.
2 Mount the unit on the tripod attachment.
Slide the unit along the groove toward the front until it clicks into place.
Detaching the unit from the tripod attachment
Tripod attachment
Attaching the shoulder belt (optional accessory)
Shoulder belt
The tab opens when it is pressed.
To disengage the shoulder belt,
open the tabs of the attachment | The tab opens | |
when it is | ||
parts, and disengage. | ||
pressed. | ||
|
<Note>
Check that the shoulder belt is attached securely.
Red lever | Black lever |
While pushing down the red lever, move the black lever in the direction of the arrow and slide the unit toward the back to remove it.
<Note>
If the pin of the tripod attachment fails to return to its original position after the unit has been detached, again move the black lever in the direction of the arrow while pushing down the red lever, and return the pin to its original position. Bear in mind that the unit cannot be attached if the pin remains in the centre.
13 (E)