Panasonic AG-DVC 200E manual Video OUT, VTR Function, VTR Option, Battery

Menu contents

MAIN menu 1 of 2 (main menu)

VIDEO OUT

Item	Setting		Remarks
	options
VIDEO OUT MENU	ON	For selecting whether to output the menu
	OFF	screens to the VIDEO OUT connector.
		ON: For the screens are output.
		OFF:For the screens are not output.
		<Note>
		The VIDEO OUT MENU item is valid only
		when ENC has been selected as the
		VIDEO OUT setting.
VIDEO OUT SEL	ENC	For selecting whether the VTR signals or
	VF	VF signals are to be output from the VIDEO
		OUT connector.
		ENC: For VTR output
		VG: For VF output
REMOTE SELECT	LOCAL	For selecting the VTR control.
	1394	LOCAL: For control from the unit only
		1394:	For control from 1394

VTR FUNCTION

Item	Setting		Remarks
	options
UB MODE	USER	For selecting what is to be recorded in the
	TIME	user’s bit area.
	DATE	USER: User setting (fixed)
	TCG	TIME: Real time value in hours/minutes/
		seconds
		DATE: Real time value in year/month/day/
		hours
		TCG: Time code generator value
FIRST REC TC	REGEN	For selecting whether the TC REGEN
	PRESET	mode is to be established when recording
		is started.
		REGEN: The	regeneration mode is
		established for the time code on
		the tape.
		PRESET: The regeneration mode is not
		established for the time code on
		the tape. However, it is forcibly
		established when the unit is
		transferred from REC PAUSE to
		REC.
BACK TALLY	ON	For selecting whether the back tally lamp is
	OFF	to light.
		ON: The lamp lights.
		OFF:The lamp does not light.
FF/REW SPEED	x32	For setting the fast forward and rewind
	x64	speed.
	x100	x32: 32 times normal speed
		x64: 64 times normal speed
		x100:100 times normal speed
AUDIO SAMPLING	32K	For selecting the audio sampling frequency.
	48K	32K: 32 kHz	48K: 48 kHz

“” indicates the factory setting.

VTR OPTION

Item	Setting		Remarks
	options
TIME STAMP	REC	For selecting whether to superimpose the date
	NO-REC	and time onto the camera’s video recording.
		REC:	For superimposed
		NO-REC:For not superimposed
		<Note>
		When REC is selected, select the type of
		date and time to be superimposed with the
		TIME/DATE item of <VF DISPLAY 2/2>
		sub-menu.
INTERVAL REC	OFF	For setting whether to perform intermittent
	ON	recording.
	ONE-SHOT	OFF:	Not performed
		ON:	Performed
		ONE-SHOT:Recording is performed once for
			the period set for REC TIME, and
			then stops.
REC TIME	00m05s	For setting the recording time for
	:	intermittent recording.
	59m59s	<Note>
		The REC TIME setting is effective only
		when ON or ONE-SHOT is set for
		INTERVAL REC.
INTERVAL TIME	00h00m10s	For setting the REC PAUSE time during
	:	intermittent recording.
	23h59m59s	<Note>
		The INTERVAL TIME item is valid only
		when ON has been selected as the
		INTERVAL REC setting.
PAUSE TIME	3min	For setting the time that is allowed to elapse
	6min	before REC PAUSE is replaced with SAVE.
	10min

BATTERY

Item	Setting	Remarks
	options
BATTERY SELECT	NiCd12	For selecting the type of battery used.
	NiCd13	NiCd12: NP-1B made by Sony
	NiCd14	NiCd13: TRIM13 made by Anton Bauer
	TYPE A	NiCd14: TRIM14 made by Anton Bauer
	TYPE B	TYPE A:AJ-BP490
		TYPE B:Digital 14 V (Hitron 100) made by
		Anton Bauer
TYPE A NEAR	11.0V	For designating the type A voltage. When the
END	:	voltage set here is reached, the battery is
	11.6V	considered to have a minimal remaining
	:	charge, and a warning is displayed. A voltage
	15.0V	from 11.0 V to 15.0 V is used as the setting.
TYPE A END	11.0V	For designating the type A voltage. When
	:	the voltage set here is reached, the battery
	11.2V	is considered to be flat, and a warning is
	:	displayed. A voltage from 11.0 V to 15.0 V
	15.0V	is used as the setting.
TYPE B NEAR	11.0V	For designating the type B voltage. When the
END	:	voltage set here is reached, the battery is
	13.0V	considered to have a minimal remaining
	:	charge, and a warning is displayed. A voltage
	15.0V	from 11.0 V to 15.0 V is used as the setting.
TYPE B END	11.0V	For designating the type B voltage. When
	:	the voltage set here is reached, the battery
	12.5V	is considered to be flat, and a warning is
	:	displayed. A voltage from 11.0 V to 15.0 V
	15.0V	is used as the setting.

ENGLISH

34 (E)