Agilent Technologies E5810A manual Accessing the Telnet Utility, Using the Telnet Utility

From the Windows XP taskbar, select

Start All Programs AccessoriesCommand Prompt. The MS-DOS window opens.

Using the Telnet Utility

Using the Telnet Utility

Using the Telnet Utility

Accessing the Telnet Utility

For backward compatibility with the E2050 LAN/GPIB Gateway, the Telnet Utility functionality is provided with the E5810. However, E5810 Web Access is the preferred method to configure the E5810.

To access the Telnet utility:

If you are on a Windows 2000 computer system, do the following:

From the Windows 2000 taskbar, select

Start Programs Accessories Command Prompt. The MS-DOS window opens.

From the MS-DOS window, type telnet IP_address, where

IP address is the IP address of the E5810, and then press Enter. When you are connected to the E5810 Telnet utility, you will see a

1	listing of main Telnet commands and current configuration values for
	this E5810.
	You may also need to adjust Local Echo in the Terminal Preferences
	dialog box so the Telnet utility will properly display your typed input. To
	do this:
	￿	From the menu at the top of the Telnet window, select
		Terminal Preferences. The Terminal Preferences dialog
		box is displayed.
2	Click￿￿	Click the check box next to Local Echo to change it.
		OK to close the Terminal Preferences dialog box.
3
Appendix B			141
4
5