Using E5810 Web Access
E5810 Description
E5810 Software/Firmware
Since the E5810 is Web-enabled, you can communicate with the E5810 from a supported Web browser. The E5810 supports Internet Explorer 4.0 or higher and Netscape Navigator 4.7 and higher. Typing in the E5810 IP address (or E5810 hostname, if known) on your Web browser address line and then pressing the Enter key displays the E5810 Welcome page.
You can use the Web access to configure the E5810 and to communicate with GPIB and/or RS-232 instruments. For example, using the Configuring your E5810 LAN/GPIB Gateway page of the E5810 interface, you can view and modify the configuration of the E5810. Or, you can communicate with installed GPIB and/or RS-232 instruments using the Find and Control Instruments Connected to your E5810 page of the interface. See Chapter 3 - Using E5810 Web Access for information on E5810 Web access.
