9
ICES Statement
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
Safety SymbolsWARNINGS
The following general safety precautions must be observed during all
phases of operation, service, and repair of this product. Failure to comply
with these precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture, and intended use of t he
product. Agilent Technologies assumes no liability for the customer's failure
to comply with these requirements.
Ground the equipment: For Safety Class 1 equipment (equipment having a
protective earth terminal), an uninterruptible safety earth ground must be
provided from the mains power source to the product input wiring terminals
or supplied power cable.
DO NOT operate the product in an explosive atmosphere or in the presence of
flammable gases or fumes.
For continued protection against fire, replace the line fuse(s) only with
fuse(s) of the same voltage and current rating and type. DO NOT use
repaired fuses or short-circuited fuse holders.
Instruction manual sy mbol affixed to
product. Indicates that the user must
refer to the manual for specifi c
WARNING or CAUTION information to
avoid personal injury or damage to the
product.
Indicates the field wiring term inal that
must be connected to earth ground
before operating the equipment —
protects against elect rical shock in
case of fault.
Frame or chassis grou nd terminal—
typically connects to the equipment's
metal frame
Alternating current (AC).
Direct current (DC).
Warning. Risk of electrical shock .
Calls attention to a procedure,
practice, or condition t ha t co ul d cause
bodily injury or death.
Calls attention to a procedure,
practice, or condition that cou ld
possibly cause damage to equipment
or permanent loss of data.
or
WARNING
CAUTION