Installing the E5810
Installing the E5810 on an Enterprise Network
4Set E5810 for DHCP Enterprise Network Operation. For an Enterprise network that supports DHCP, the only values you may need to set are the Hostname and Universal Plug and Play (UPnP) settings, as provided to you by your System Administrator, on the Configuring your E5810 LAN/GPIB Gateway page.
Hostname
Enterprise Network Supports DNS | Enterprise Network Does Not Support DNS |
If the network supports dynamic DNS, | No action required. Hostnames are not |
enter the Hostname provided by the System | supported. Use only the IP address when |
Administrator. Then, you can access the | communicating with the E5810. |
E5810 from your Web browser by using the |
|
Hostname. |
|
If the network supports DNS, enter the DNS |
|
Server IP Address provided by the System |
|
Administrator. |
|
|
|
Universal Plug and Play (UPnP) |
|
|
|
UPnP Enabled is Allowed on Enterprise | UPnP Enabled is Not Allowed on Enterprise |
Network | Network or You Do Not Want the E5810 to be |
| Displayed in My Network Places |
No action is required for the E5810. However, | Set Universal Plug and Play to OFF. |
if you want to see the E5810 in My Network |
|
Places, you may need to enable |
|
UPnP on your computer’s Operating System. |
|
|
|
Where to Go Next
Go to “Verifying Instrument Communication.”
60 | Chapter 2 |
