| Installing the E5810 |
| Configuring the E5810 on a Local Network |
|
|
IP Address Assignment |
|
|
|
Enterprise Network Supports DHCP | Enterprise Network Does Not Support DHCP |
No action required. The E5810 automatically | Click DHCP OFF and enter the values |
receives an IP address from the network | provided by the System Administrator for |
DHCP Server. | IP Address, Subnet Mask, and Default |
| Gateway IP Address. |
|
|
Hostname |
|
|
|
Enterprise Network Supports DNS | Enterprise Network Does Not Support DNS |
If the network supports dynamic DNS, enter | No action required. Hostnames are not |
the Hostname provided by the System | supported. Use only the IP address when |
Administrator. Then, you can access the | communicating with the E5810. |
E5810 from your Web browser by using the |
|
Hostname. |
|
If the network supports DNS, enter the DNS |
|
Server IP Address provided by the System |
|
Administrator. |
|
|
|
Universal Plug and Play (UPnP) |
|
|
|
UPnP Enabled is Allowed on Enterprise | UPnP Enabled is Not Allowed on Enterprise |
Network | Network or You Do Not Want the E5810 to be |
| Displayed in My Network Places |
No action is required for the E5810. However, | Set Universal Plug and Play to OFF. |
if you want to see the E5810 in My Network |
|
Places, you may need to enable UPnP on |
|
your computer’s Operating System. |
|
|
|
Chapter 2 | 53 |
