52 Chapter 2
Installing the E5810
Configuring the E5810 on a Local Network
If the default password (E5810) is being used, the password is
displayed as asterisks (*****). If not, type in the current password. Then,
click the Submit button to display the Configuring Your E5810 LAN/GPIB
Gateway page.
4Set E5810 for Enterprise Network Operation. To properly set E5810
configuration parameters for eventual use on an Enterprise network,
you may need to enter the following network values, as provided to you
by your System Administrator, on the Configuring your E5810 LAN/GPIB
Gateway page.