To reset the E5810 to the default configuration values and reboot the E5810, at the Telnet prompt (>) type factory-reset.
Using the Telnet Utility
Using the Telnet Utility
Exiting the Telnet To exit the Telnet utility, use these Telnet commands.
Utility
If you want to exit without saving any changes (if any) you have made to the configuration values, at the Telnet prompt (>) type
bye (or) exit (or) quit.
If you want to save the changes you have made to the configuration values via the Telnet utility, at the Telnet prompt (>) type reboot.
CAUTION
Any client operations in progress and client connections will be terminated by the reboot command.
CAUTION
Any client operations in progress and client connections will be terminated by the
142 | Appendix B |
