Agilent Technologies E5810A manual E5810 Operating Features

	E5810 Description
	E5810 Software/Firmware
E5810 Operating Features
Feature	Description
Remote access to	Access and control up to 14 GPIB and/or one RS-232 instrument via a
instruments via LAN	10BASE-T/100BASE-TX Ethernet. The E5810 detects the network
	and configures itself to the appropriate speed. The E5810 has a
	standard RJ-45 LAN connector. You can use adapters to connect other
	interface types, such as optical or wireless LAN.
I/O Software Included	The E5810 includes the Agilent IO Libraries Suite, which includes
	Agilent Virtual Instrument Software Architecture (VISA), VISA COM,
	Standard Instrument Control Library (SICL), and several I/O utilities.
	This standard software provides compatibility with different hardware
	and software vendors. It provides the I/O software layer used when
	accessing the E5810. You can use a standard programming language,
	such as Visual Basic, Visual C++, Agilent VEE, etc.
	The E5810 supports all I/O application operations provided by VISA,
	VISA COM, SICL, and Agilent VEE. The E5810 is supported on
	Microsoft Windows 2000/XP/Vista.
	You can also use the Agilent IntuiLink software (included with some
	Agilent products) to download data and send waveforms to the source,
	with no programming.
Supports DHCP	The E5810 supports Dynamic Host Configuration Protocol (DHCP) to
Protocol	get its IP address. Although the E5810 defaults to using DHCP, you
	can turn DHCP OFF and statically assign the E5810 IP address.
Ease of Use	Built-in Web access and front panel display allow you to easily set up,
	configure, and use the E5810. You can connect multiple E5810s in a
	test system. Each E5810 creates a separate GPIB bus.

Chapter 1 25