Agilent Technologies E5810A manual E5810 Current Settings, Ethernet MAC Address

Using E5810 Web Access

Using the Welcome Page

E5810 Current Settings

The Current Settings part of the Welcome page displays some of the current settings for the E5810. A typical display follows. See “E5810 Configuration Parameter Descriptions” in this chapter for detailed descriptions.

Ethernet (MAC) Address

A unique address assigned by the manufacturer for each Internet device. The Ethernet address is on a label on the underside of the E5810.

Hostname

Internet domain name for the E5810 that may be used to communicate with the E5810. The Hostname is not a required configuration value.

IP Address

The E5810 IP Address. An IP address is a 32-bit numeric address expressed as four numbers separated by periods (e.g., 152.160.10.240).

GPIB SICL Interface Name

Each GPIB interface used by Agilent VISA or SICL must have a SICL Interface Name. For VXI-11 protocol, use "gpib0".

RS-232 SICL Interface Name

"COM1" is the default value. Client SICL applications will use full SICL name of "COM1,488"

Firmware.Revision

Current firmware revision on this E5810. See “Updating E5810 Firmware” for information on upgrading E5810 firmware.

Serial Number

Unique serial number for this E5810, located on a label on the underside of the E5810.

82 Chapter 3