Installing the E5810
Configuring the E5810 on a Local Network
Connecting the E5810 to a Local Network
E5810 Hub/Switch Connections
This section shows how to connect the E5810 to a Local network using an Ethernet hub/switch or a crossover cable.
This figure shows typical E5810 Ethernet hub or switch connections. Since the E5810 has no AC Power switch, the Mains disconnect for the E5810 is to unplug the AC power cord from the AC outlet.
Typical Local Network Connections (Hub/Switch) (Two PCs)
Ethernet Hub/Switch
1. Connect LAN patch cables (do NOT use crossover cables)
4. Connect to AC Power
2. Connect GPIB Cable to GPIB Instrument(s)
3. Connect
46 | Chapter 2 |
