
Installing the E5810
Configuring the E5810 on a Local Network
Configuring the E5810 for Enterprise Network Operation
You can check or set E5810 configuration parameters using the E5810 Web access that is accessed from your Web browser (Internet Explorer 4.0 or higher or Netscape Navigator 4.7 or higher). The steps to set E5810 configuration parameters are:
1Display the Welcome Page. From your Web browser address line, type
‘http://<E5810 IP Address>’, where E5810 IP Address is the IP address displayed on the E5810 front<panel display. Then, press> the Enter key to display the E5810 Welcome page.
For example, if the default IP address of 169.254.58.10 is displayed on the E5810 front panel, typing http://169.254.58.10 on your Web browser address line and pressing Enter displays the E5810 Welcome page. The following figure shows a typical display.
50 | Chapter 2 |