To connect to Meridian 600 or 200 Series equipment
If your system includes any Meridian 600 or 200 Series units, with 600 COMMS or 200 COMMS sockets, you should set all the 500 Series units to 200 COMMS operation using the following procedure:
●Turn off the CD player, using the power switch on the back panel.
●Turn on the power again while holding down the Off key on the front panel.
To connect to DSP6000 or DSP5000 Digital Loudspeakers
●Connect the socket marked DIGITAL OUTPUT on the back panel of the CD player to the
●Follow the instructions provided in the DSP6000 or DSP5000 manual for connecting to a CD player.
The DSP6000 and DSP5000 loudspeakers are fully programmable, and you should consult your manual before deciding which input to use. If you have any doubts, your dealer will be able to assist you.
the CD player
The display will show the current setup:
Press ] (Next) on the front panel to change to Type 2:
Type 1
Type 2
Suitable cables are available from your Meridian dealer, or Meridian Audio Limited.
Setting up
●Switch the power off and on again to restore the CD player to normal operation.
●To return to 500 COMMS operation repeat the above procedure, and select Type 1.
20
