Manuals / Meridian America / Home Audio / CD Player

Meridian America 506 To connect to a 501 Control Unit, To connect to a conventional preamplifier

Models: 506

1 31

Page 24

To connect to a 501 Control Unit

501 Control Unit		506 24-Bit CD Player
COMMS	CD	OUTPUT COMMS

Audio lead

500 comms lead

●Connect the sockets marked OUTPUT L and R on the back panel of the CD player to the CD input on the back panel of the 501 Control Unit.

To connect to a conventional preamplifier

●Connect the sockets marked OUTPUT L and R on the back panel of the CD player to an appropriate input on your preamplifier.

You should consult the manufacturer’s manual to determine which input to use, but generally it will be labelled CD or AUX.

You should either use a twin-screened audio cable, or a pair of single-screened audio cables. These cables can have a considerable effect on the quality of the sound, and you are advised to seek your dealer’s advice on the best type of cables for your system.

Setting up the CD player

Page 24

Image 24

Meridian America 506 To connect to a 501 Control Unit, To connect to a conventional preamplifier, Setting up the CD player

Contents

Meridian 506 24-BitCD Player Meridian 506 24-BitCD Player User Guide PrefaceSales and service in the UK Sales and service in the USAPreface Designed and manufactured in the UK byContents Using the CD playerSetting up the IntroductionPreface Introduction IntroductionThe Meridian 500 Series 500 Series communicationsIntroduction Specification and accessories SpecificationAvailable accessories DimensionsIntroduction Using the CD player Using the CD playerFront panel Using the CD playerPlay Switching on and off To switch on from standbyTo switch to standby UsingPlaying a disc To move to the next trackTo play starting from a particular track To play the discStopping, pausing, and repeating play To continue after pausingTo cancel the repeat function To continuously repeat a discProgramming a selection To choose a track to programmeUsing the CD player To add a track to a selection To remove a track from a selectionTo clear a programme Using the CD playerDisc information and scanning To change the displayScanning a disc To scan through a discUsing index points To move to an index pointTo display the index number 14.7Using the CD player Setting up the CD player Setting up the CD playerUnpacking To position the CD playerRadio interference Setting up the CD playerConnecting the CD player Setting up the CD playerBack panel Setting up To connect to other MeridianSeries equipment N.ConTo connect to a 501 Control Unit To connect to a conventional preamplifierSetting up the CD player 501 Control UnitType Type Setting upthe CD player Troubleshooting No lights are displayed when switching onThere is no sound when playing a disc The drawer will not openThere is interference on the radio and/ or television when the CD player is switched on Maintenance CleaningTo clean the case, display panel, and keypad To clean the audio connectionsService and guarantee ServiceGuarantee Setting up the CD playerIndex IndexIndex Programming a selectioncontinued

To connect to a 501 Control Unit

501 Control Unit

506 24-Bit CD Player

Audio lead

To connect to a conventional preamplifier