Programming a selection
With the remote you can programme a selection of tracks, and then play only those tracks you have programmed.
You can programme a selection either by storing the tracks you want to play, or by clearing the tracks you do not want to play. If you programme a selection by storing the tracks you want to hear, you can play the tracks in any order and repeat tracks in the sequence.
You can programme a selection while the disc is playing, in which case the selection will be played after the current track finishes.
Attempting to programme more than
31 tracks will display an error warning:
To programme by specifying the tracks you want to play
●Choose the first track you want to play, as described above.
The display will show the track number; for example:
●Press Store (remote only).
The display will change to:
You should store the track within two seconds, or it will begin to play.
The track will be labelled Store.
Using the CD player
To choose a track to programme
●Press Next or Previous to step through the track numbers until the track you want is displayed, or type the number of the track you want.
All the other tracks are initially programmed not to play, and will be labelled Clear.
10