4 
Settings
Setting Menu (Continued)
Setup > Picture Position
M Picture Position
Adjusts the horizontal/vertical position of the projected image.
zThe display position value varies with the input signal.
zThis adjustment is available for analog input signals, or for COMPONENT and
Setup > HDMI Input Level
N HDMI Input Level
Configures the input level setting of the HDMI input terminal.
StandardFor normal circumstances, select this setting.
Enhanced
Select this setting when the
zThis setting is available only when projecting the HDMI input.
Setup > Mask
OMask
Masks (Hides) the outer area of the projected image.
| 2.5% | Masks 2.5 % of the screen. |
|
|
|
| 5% | Masks 5 % of the screen. |
|
|
|
| Off | No masking. |
|
|
|
zMasking is available only when high definition images are input.
Setup > Overscan
POverscan
Selects whether or not to set overscan for the 4:3 video signals (NTSC, PAL, SECAM, 480i, 576i, 480p and 576p).
| Off | No overscan. |
|
|
|
| On | Overscans the top, left, bottom and right at 2.5 % each. |
|
|
|
zThis setting is not available when PC signals are input to HDMI terminal.
Source > COMP
Q COMP
Configures the input signals of the component video input terminals.
| Y Pb/Cb Pr/Cr | Select this when component video signals are input. |
|
|
|
| RGB | Select this when RGB video signals are input. |
|
|
|
| SCART | Select this when RGB video signals and sync signals are input from SCART plug for |
| European market. | |
|
| |
|
|
|
zThis setting is available only when projecting the component video input.
Source > HDMI
R HDMI
Configures the input signals of the HDMI input terminal.
| Auto | Automatically configures input signals. |
|
|
|
| YCbCr(4:4:4) | Select this when Y Cb Cr (4:4:4) video signals are input. |
|
|
|
| YCbCr(4:2:2) | Select this when Y Cb Cr (4:2:2) video signals are input. |
|
|
|
| RGB | Select this when RGB video signals are input. |
|
|
|
zThis setting is available only when projecting the HDMI input.
28
