Metra Electronics 99-7011 installation instructions Applications, MITSUBISHI Lancer

Models: 99-7011

1 12

Page 1

2008-2010

KIT FEATURES

•DIN Radio Provision with Pocket

•ISO Mount Radio Provision with Pocket

•Double DIN Radio Provision

•Stacked ISO Mount Units Provision

•Painted to Match Factory

KIT COMPONENTS

•A) Radio Housing • B) ISO Brackets • C) Trim Plate • D) Double DIN Brackets

•E) Double DIN Trim Plate • F) Snap in Pocket

WIRING AND ANTENNA CONNECTIONS: (Sold Separately)

Harness:

•MITO-02 - Mitsubishi amp interface harness 2007-up

•70-7005 - Mitsubishi harness 2007-up

Antenna Adapter:

• No antenna adapter required

TOOLS REQUIRED:

Phillips Screwdriver/ Panel Removal Tool

• Cutting Tool

Image 1

Contents

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS99-7011 MITSUBISHI LancerDash Disassembly TABLE OF CONTENTSKit Assembly 99-7011MITSUBISHI LANCER 99-7011DASH DISASSEMBLYFigure B B Continued on pageMITSUBISHI LANCER 99-7011DASH DISASSEMBLYContinue to kit preparation Continue to kit assembly 99-7011KIT PREPARATIONMITSUBISHI LANCER DIN RADIO PROVISION WITH POCKET 99-7011KIT ASSEMBLYContinue to final assembly Figure B99-7011KIT ASSEMBLY ISO MOUNT RADIO PROVISION WITH POCKETContinue to final assembly Figure CSTACKED ISO MOUNT UNITS PROVISION DOUBLE DIN RADIO PROVISION99-7011KIT ASSEMBLY Continue to final assemblyFINAL ASSEMBLY 99-7011FINAL ASSEMBLYFINAL WIRING CONNECTIONS A Strip wire ends back 1/299-7011 99-7011 99-7011INSTRUCTIONS