The singlemode (SM) connector supports a maximum segment length of 20, 40, 60, or 100 km, depending on the model.
NOTE: To enable remote management, make sure the management (MAN) LED is ON after connecting the fiber cable to the remote access line card. If not, reset one of the access line cards via software or a power cycle of the card.
BWDM Interface
The bidirectional wavelength division multiplexed (BWDM) port provides one pair of singlemode SC connectors that supports a maximum segment length of 20 km. BWDM line cards must always be used in complementary pairs. That is, a -1X model must always be connected to a -1Y. The -1X cards are designed to transmit data at a wavelength of 1550 nm and receive at 1310 nm. Correspondingly, the - 1Y cards transmit data at 1310 nm and receive at 1550 nm.
CWDM Interface
The coarse wavelength division multiplexed (CWDM) port provides one pair of singlemode LC connectors that supports a maximum segment length of 60 km. The port’s wavelength (in nm) is printed on the front panel.
Network Connections
R231-13 RJ-45 to FX multimode SC ________________ 100 m/2 km
R231-14 RJ-45 to FX singlemode SC _______________ 100 m/20 km
R231-15 RJ-45 to FX multimode ST ________________ 100 m/2 km
R231-16 RJ-45 to FX singlemode ST _______________ 100 m/20 km
R231-17 RJ-45 to FX singlemode SC _______________ 100 m/40 km
R231-1J RJ-45 to FX singlemode SC ______________ 100 m/100 km
R231-1X RJ-45 to FX singlemode BWDM SC _______ 100 m/20 km
R231-1Y RJ-45 to FX singlemode CWDM SC _______ 100 m/20 km
R231-47 RJ-45 to FX singlemode CWDM LC _______ 100 m/60 km
R231-49 RJ-45 to FX singlemode CWDM LC _______ 100 m/60 km
R231-51 RJ-45 to FX singlemode CWDM LC _______ 100 m/60 km
R231-53 RJ-45 to FX singlemode CWDM LC _______ 100 m/60 km
R231-55 RJ-45 to FX singlemode CWDM LC _______ 100 m/60 km
R231-57 RJ-45 to FX singlemode CWDM LC _______ 100 m/60 km
R231-59 RJ-45 to FX singlemode CWDM LC _______ 100 m/60 km
R231-61 RJ-45 to FX singlemode CWDM LC ________ 100 m/60 km
