8
The MS6720 Stand
The stand for the MS6720 is ergonomic and application friendly. The mounting was
designed to provide an adequate distance for scanning between the scanner face and the
counter top at all times. When fully tilted, the face of the scanner remains a full five
inches from the counter. The stand comes preassembled so it can be attached to the
work surface with minimum effort (also included is the wall mount clip). The instruc-
tions for use of the wall mount clip are included with the general assembly instructions
for the stand. Listed below are the component parts of the MS6720 stand kits.
1) Complete Stand Kit:
MLPN 45967
Kit includes:
MLPN 45965 (counter top stand)
MLPN 45969 (weighted base)
MLPN 45978 (wall clip)
10-32 x 3/8" flat head screws
#10 x 1" flat head wood screws
2) Counter top Stand Kit:
(for securing directly to a counter top ONLY)
MLPN 45965
Kit includes:
each: parts a, b, c, d as shown
#10 x 1" flat head wood screws
3) Wall Mount Kit:
(for directly to a wall ONLY)
MLPN 45966
Kit includes:
part (a) as shown
45978 (wall clip)
#10 x 1" flat head wood screws