Failure Modes

Flashing Red and One Razzberry Tone

This indicates the scanner has experienced a laser subsystem failure. Return the unit for repair at an authorized service center.

Flashing Red and Green and Two Razzberry Tones

This indicates the scanner has experienced a motor failure. Return the unit for repair at an authorized service center.

Continuous Razzberry Tone with both LEDs off

If, upon power up, the scanner emits a continuous razz- berry tone, then the scanner has an electronic failure. Return the unit for repair at an authorized service center.

Three Beeps - on power up

***

If the scanner beeps 3 times on power up then, the non volatile memory which holds the scanner configuration has failed. Return the unit for repair at an authorized service center.

11

Page 15
Image 15
Metrologic Instruments MLPN 2358 manual Failure Modes, Flashing Red and One Razzberry Tone, Three Beeps on power up