- 53 -

Volume Bar

It is displayed in the lower middle of the
screen. When a volume command is re-
ceived (pressing + or - by Re-
mote Control or Control panel at the top of
the TV) and no menu is active, it stays on the
screen for 3 seconds, after the last volume
command or until another command is re-
ceived in between.

AV Modes

By pressing the AV button you can switch
your TV to AV modes (except being in Tele-
text). Pressing this button will consecutively
switch the TV in one of the optional AV
modes: AV-1, AV-2, AV-3, S-VIDEO, PC.
In order to quit the AV mode press the TV,
digit buttons or P- or P+ .

Signal Out Of Range

When the PC input signal is not supported
by LCD-TFT TV, a message is displayed like
Signal out of range and screen is blanked.
PC MODE

Installation

 Power off both Computer and Display before
making any connections.
 The monitor comes with a 15-pin PC cable.
Connect end of the signal cable to the 15-
pin connector on the rear of the Computer.
 Tighten the screws of the Display cable until
the connectors are fastened securely (fin-
ger-tighten only).
 If you are using Windows operating system
running on a PC with a Microsoft Plug & Play
compatible video card, your system will se-
lect the appropriate timing for your monitor.

Switching from TV to PC

Press   before (hold pressed) and then
SHIFT button together to swich directly PC
mode.

Main Menu in PC mode:

Enter the main menu by pressing the
MENU button on the remote control.

Sound Menu

In the main menu select Sound using 
or   button then enter the Sound menu
pressing  ,   or MODE buttons.
The items in this menu are described at
Sound menu starting page 43.

Picture Menu

In the Main menu, select Picture using 
or   button, then enter the Picture menu
pressing  ,   or MODE buttons.
All adjustment in this menu except Picture
Mode is identical to adjustment defined TV
picture menu starting on page 45. Picture