Metz MF 72TK80, MF 72TK81, MF 72TK86, MF 82TK96, MF 82TK97, MF 84TK89 Picture settings, general

Call the menu

MENU

OK

11.Picture settings, general

☞In a menu with two asterisks (**), the set- tings for certain menu items cannot be changed.

You can adjust the picture settings (brightness, contrast, chrominance, etc.) for all programme positions and save these settings as the standard values. These standard values can be recalled at any time by pressing the „OK“ key.

Defining the picture settings:

•Press the „MENU“ key to open the TV menu.

•Press the „OK“ key to open the menu „Picture and sound“.

TV-Menü

Picture-Volume

AV devices

Station table

Timer Configuration

: select, OK: go to settings.

Picture pos.,vertic* Film mode*2)

CTI*

Comb filter

Noise reduction Sound set.prog.po Picture sharpness Sound settings, gen. Colour intensity Pict. set.,prog. posn.* Contrast

Pict. settings, gen. Brightness

Brightness	61
Standard value	50

Accept 61 as the standard value:

•Use the cursor control key to select the individual picture settings.

•Press the „OK“ key and then use the

- + key to change the setting in the set- ting window.

•Use the cursor control key to select the 3rd line in the setting window "...

accept as a standard value: OK".

•Save the new setting as the standard value by pressing the „OK“ key.

OK

OK

*The number of subjects and sections displayed here depends on the opera- ting scope setting.

•Press the „TV“ key to close the menu

☞If these standard settings are unsatisfactory for some programme positions, you can define special individual settings for these positions as described on the next page.

2) Rotation

This function can be used to compensate for any tilting of the picture caused by the earth’s magne- tic field. The function should be executed when the set is first installed and if the set is subsequently moved to a different position.

3) Film mode – see glossary.

2)Available only on TV sets which are equipped with this option.

24