Manuals / Metz / Photography / Camcorder

Metz 082 NB, NB 1018, 1014 083, 081, NB 1010 Set the polarizer, Set the relay control voltage

Models: 081 082 NB NB 1018 1014 083 NB 1010

1 27

Download 27 pages 3.21 Kb

Page 11

Image 11

4. Aerial Control Assigning LNC or polarizer values

Press this key on the remote

control

4. Set the polarizer

-	+

The screen displays

	LNC pwr supply:	H
	22 kHz signal:	On/Off
	Polarizer:	2
AV	Relay:	On/Off
	AFC:	On/Off
	6 9 6 + S 0 4 D - G B

store ?

696ˇˇ S00

Explanation

Pressing the white key causes the text Polarizer to be displayed on a white background to indicate that it is active.

One of the five polarizer settings (see section 3 of the- se operating instructions) can now be selected with

the	-	+	keys.

5. Set the relay control voltage

		LNC pwr supply:	H
		22 kHz signal:	On/Off
		Polarizer:	1
		AV Relay:	On/Off
	AV	AFC:	On/Off
	AV	6 9 6 + S 0 4 E - G B
			store ?
			OK
-		+	696+S00ˇˇ
		+

6.Store the settings and return to the TV picture

The relay can be used to send a control voltage of approximately 12 V („On“) or not („Off“).

This setting can be made individually for each program position.

Page 11

Image 11

Metz 082 NB, NB 1018, 1014 083, 081, NB 1010 operating instructions Set the polarizer, Set the relay control voltage

Contents

SAT Index Preface For 100 Hz sets Set the 22 kHz switching signalLNC frequency Store the stations and return to the TV picture SAT-programmingSet the LNC frequencies Select the first programme position Call the menu „Station set- tings Station settingsFor 50 Hz sets SAT-programming SAT programme tables LNC pwr supply LNC Power Supply Setting the LNC voltagesSAT settings Call the menu „LNC power supply Set „LNC voltage H Screen displays Explanation Setting the LNC voltagesSet „LNC voltage Store the settings Polarizer Setting the polarizer valuesSAT settings Call the submenu „Aerial control and set the LNC voltage Switch systemsAerial Control Assigning LNC or polarizer values Call the station table and select the submenu „Chan- nel Set the relay control voltage Set the polarizer Key to resume the search Aerial Control SAT frequency input / station searchKey TV station table Switch off AFCAerial Control Station table Sound and set the sound ModeTV set with „Channel Set „Channel 1 and/or Video level/Bandwidth Adjust the video levelAdjust the video bandwidth Store the setting and return to the TV picture Decoder Operation Setting the video signalSet the video signal Video signal is set in the factory to Fbas AV-menu Call the AV menu and define the signal pathConfirm the setting and cle- ar the menu Recording SAT Programs On TV sets with 1 Euro socket AV recording Recording SAT Programs On TV sets with 3 Euro sockets Gram to be recorded see Example SAT Timer recordingCall the menu „SAT timer recording Enter the data for the pro Our example, the station NDR 2 uses horizontal polarisation SAT Radio Operation Programming radio stations Set the „Deemphasis Store the settings and close the menuSet the „Bandwidth ADR must be selected for an ADR station Radio stationsProgramming ADR Red station Radio stations Call sub-menu „SAT sound settings and set the sound modeRadio station table Timers Technical DataAccessories Power consumption Basically, the TV set offers TV station table SAT radio station tableNumber TV program positions SAT radio stations Always first class

4. Aerial Control Assigning LNC or polarizer values

4. Set the polarizer

AFC:

5. Set the relay control voltage