Metz NB 1010, 081 SAT-programming, Set the LNC frequencies, Select the first programme position

Hz

1. SAT Programming	LNC frequency
	for 100 Hz sets

Hz 100 Hz 100 Hz 100 Hz 100 Hz 100 Hz 100 Hz 100

Press this key on the remote

control

4. Set the LNC frequencies

	red
-	+

5.Select the desired stations (in this example: ASTRA)

6.Select the first programme position

0 1

The screen displays

MENU return TV TV picture ? Help

SAT-programming

ASTRA

58 TV stations *

41 radio stations * 45 ADR stations *

AV 22 kHz signal		Off
	LNC-Freq. H	9,75 GHz
	LNC-Freq. V	9,75 GHz

6 9 6 - S 0 1 F - G B

MENU return			TV TV picture	?	Help
	SAT-programming
		ARD
		ZDF
		SAT1
		RTL
		BR 3
		NDR3
		MDR3
		SWF3
B		WDR3
- G		3SAT
0 1 C	ASTRA
S		ARD	delete
9 6 +
		58 TV stations *
6		from prog number		– –
MENU return		TV TV picture		?	Help
	SAT-programming
		ARD
		ZDF
		SAT1
		RTL
		BR 3
		NDR3
		MDR3
		SWF3
B		WDR3
- G		3SAT
0 1 D
	ASTRA
S		ARD	delete
69 6 +				01store?
		from prog number
		58 TV stations *
				OK

Explanation

Before your transfer the desired group of SAT stations, you must always set and store the required LNC frequencies.

If these LNC frequencies are not set, the stations will not be stored with the correct channel num- ber or the TV set will be tuned incorrectly if you enter a station frequency. In such cases, no picture will be displayed when you select the related programme position or a station which is stored in another programme position will appear.

If you press the red key once, you can adjust the LNC frequencies for vertical and horizontal polarisation

together with the - + keys.

If you press the red key twice, only the LNC frequency for vertical polarisation is selected for adjustment with

the - + keys. The LNC frequencies are stored

together with the stations.

The first 10 program positions of the selected group of stations are displayed in the station table.

You can now select individual stations with the P+ and P- keys and delete them by pressing the key.

This can be done, for example, to remove encoded stations for which you have no decoder.

* Number of stations as in January 1997

The TV set now asks for the first program position, i.e. the programme position at which storage of the stati- ons is to start. Enter the desired program position with the numerical keys. The selected stations will then be stored continuously, starting at this program position.

In TV sets which can manage more than 200 program positions, a separate station table (with blue header line) is generated for SAT radio stations. This table contains only radio stations. The function can be cancelled at this point by pressing the TV key; the stored settings are not changed.

100 Hz 100

7.Store the stations and return to the TV picture

OK

TV

The selected stations are copied from the station table to the programme storage.

After the transfer, you can sort the stations as described in Section 3.1 of the Operating Instructions for the TV set.

4