Metz 1014 083, NB 1018, 082 NB, 081, NB 1010 operating instructions Preface, Index

Preface

Dear Customer,

we congratulate you on the purchase of the SAT Upgrade Kit which enables you to receive the programs transmitted via TV satellites without the need for a separate SAT receiver and an additional remote control.

These operating instructions explain the operation of your TV set for the reception of satellite programs.

The settings for the best-known TV and radio satellite programs transmitted via the satellites ASTRA,HOTBIRD and EUTELSAT (see satellite transmitter table) have been programmed in the factory, ready for use.

Chapter „1. SAT Programming“ describes how to quickly assign the desired programs.

Your METZ-WERKE

	Contents
	Preface	. .2
	Contents	. .2
	Index	. .2
	Differences in the permanent Display	. .2
1.	SAT programming	. .3
	LNC frequency (100 Hz)	. .3
	LNC frequency (50 Hz)	. .5
	Transferring programs (50 Hz)	. .6
2.	LNC power supply	. .7
	Setting the LNC voltages	. .7
3.	Polarizer	. .9
4.	Aerial control	.10
	Assigning LNC or polarizer values	.10
	SAT frequency input / station search	.12
	Switch off AFC (Automatic Frequency Control)	.13
5.	SAT sound settings	.14
	Sound mode	.14
	Muting (for SAT radio programs)	.14
	Bandwidth, deemphasis	.15
6.	Picture adjustment	.16
	Video level	.16
7.	Decoder operation	.17
	Video signal	.17
8.	Recording SAT programs	.18
9.	Timer-controlled recording of SAT programs	.20
10.	SAT radio operation	.21
11.	SAT-ADR radio operation	.23
12.	Technical data	.25
13.	Accessories	.25
14.	Program position management for SAT	.26

Index

22 kHz switching, . . . . . . . . . . . . . . . . . . . . . . . .3, 6 AFC switch off, . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Bandwidth, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Deemphasis, . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Multi-switch system, . . . . . . . . . . . . . . . . . . . . . . . . 3 Muting, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Picture signal , . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Decoder operation, . . . . . . . . . . . . . . . . . . . . . . . .17 Radio reception, . . . . . . . . . . . . . . . . . . . . . . . . . .21 Recording SAT programs, . . . . . . . . . . . . . . . .18, 19 Relay, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Station search, . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Differences in the permanent display

In TV sets with more than 200 program positions, the TV and radio program positions are managed in two separate station tables. Thisdifference is indicated as follows in the permanent display:

P01 stands for SAT-TV program position 01

R01 stands for SAT-radio program position 01

The SAT-radio station table is identified by a blue header line, while the SAT-TV station table has a red header line.

2