Metz NB 1018 SAT Timer recording, Call the menu „SAT timer recording, Enter the data for the pro

-/--

50 Hz 50 Hz

9. Timer-controlled Recording of SAT Pro	grams	On TV sets with
		1 EURO socket

The menu SAT timer recording should be used only if you want to record a SAT program on a video recorder which does not have its own SAT receiver. With this menu, a SAT signal from the TV set can be made available to a simple video recorder without its own SAT receiver.

Eight SAT timers can be preset up to two months in advance.

The settings for a TV set with 3 sockets is described in Section 7.1 or 8.2, „Timer recording“ of the Operating Instructions for the TV set.

Example: On 12.12.95, you want to record a film being transmitted from 20:15 to 22:10 by the SAT station on program position 1.

Hz

Press this key on the remote

control

The screen displays Explanation

Hz 50 Hz 50 Hz 50

1.Call the menu „SAT timer recording“

MENU

AV

MENU return TV TV picture ? Help

SAT Timer recording

Sat-Prog	date	Time of day			VPS
- - —	.	:	—	:	—
—	.	:	—	:	—
—	.	:	—	:	—
—	.	:	—	:	—
—	.	:	—	:	—
—	.	:	—	:	—
—	.	:	—	:	—
—	.	:	—	:	—
—	.	:	—	:	—
—	.	:	—	:	—
enter date		11.12		14:20

6 9 6 + S 0 9 A - G B

If no timer recordings have been programmed pre- viously, this table is empty. Any previously program- med settings will be displayed.

The timer menu requires the time of day and the date. The time of day is taken from Megatext and the date from the VPS signal. Note that some stations do not transmit Megatext and/or VPS signals.

If there is no station with VPS and/or Megatext stored in program position 01, the time and/or date cannot be set auto- matically and must be entered manually.

50 Hz 50 Hz 50

2. Enter the data for the pro-	MENU return	TV TV picture	? Help
gram to be recorded (see
example)	SAT Timer recording

			Sat-Prog		date	Time of day			VPS
1	2	3							AV
			1	ARD	12.12	20:15	—	22:10	yes
				—	.	:	—	:	—
4	5	6		—	.	:	—	:	—
				—	.	:	—	:	—
				—	.	:	—	:	—
				—	.	:	—	:	—
7	8	9		—	.	:	—	:	—
				—	.	:	—	:	—
				—	.	:	—	:	—
				—	.	:	—	:	—
	0			enter date		11.12		14:20
			6 9 6 + S 0 9 B - G B

Two digits must be entered for each position of the time and date, e.g. 01.09 for September 1st and 09:00 for 9 AM.

If you make a mistake while entering the data, the entry in the current column or the entire line can be cleared

with the key. The entire line can be cleared only if the key symbols in the top line are displayed in color.

If the childlock is active, you cannot execute a SAT timer recording.

50 Hz 50 Hz 50 Hz

3.Store the programmed data and return to the TV picture or to standby mode

OK

TV or

MENU return TV TV picture ? Help

SAT Timer recording

Sat-Prog		date	Time of day			VPS
						AV
1	ARD	12.12	20:15	—	22:10	yes
- -	—	.	:	—	:	—
	—	.	:	—	:	—
	—	.	:	—	:	—
	—	.	:	—	:	—
	—	.	:	—	:	—
	—	.	:	—	:	—
	—	.	:	—	:	—
	—	.	:	—	:	—
	—	.	:	—	:	—
	enter date		11.12		14:20
6 9 6 + S 0 9 C - G B

If the TV set is not receiving a VPS signal when you are programming it, a VPS signal can be set manually with the AV key. If you have programmed a timer with VPS and switched the TV set to standby mode, a TV set with 7-segment display will display „SCAn“ about one hour before the programmed start time to indicate that it is scanning for the VPS start signal.

If desired, the timer recording can be terminated at any time as described in section 8, step 3.

The same data for the time of day and date must be programmed into the video recorder on the AV program position or on a program position on which the video recorder does not receive a TV station. An MVS system (optional extra) does this automatically.

20