21
11. Picture settings, general Call the menuIn a menu with two asterisks (**), the set-
tings for certain menu items cannot be
changed.
Panorama2) function
This setting can be made only on 16:9 TV
sets.
The panorama function can be used to expand
"normal" programmes in 4:3 format to the 16:9
format. This is done by increasing the width of the
picture to fill the complete width of the screen.
Setting Panorama2) mode:
• Press the "MENU" key to open the TV
menu.
• Press the "OK" key to open the menu
"Picture and sound".
• Use the cursor control key to select
"Panorama".
• Press the "OK" key and then, in the
setting window, use the -+key to
change the setting for "Panorama".
• Use the cursor control key to select the menu
item "Mode" and use the -+key to select either
"linear" or "non-linear".
• Press the "OK" key to save your changes.
The picture shows the factory setting.
• Press the "TV" key to close the TV menu.
The functions "Panorama2)" and "Zoom"
can also be used together.
2) Available only on TV sets which are equipped
with this option.
☞
☞
☞
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
MENU
OK
OK
OK
Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.
Panorama On,zoom 1 Mode Non-linear
: select
menu item
AV devices
Station table
Timer
Configuration
Rotation2)*
Picture pos., vertica
Panorama2)*
CTI*
Comb filter*
Noise reduction*
Picture sharpness*
Colour intensity
Contrast
TV-Menü
Picture-Volume