28
Call the menu 15. ChildlockOK
OK
c) Start* and end times*
Use the cursor control key to open the file card
„Start viewing time/End viewing time“„ and
press the „OK“ key. In the setting window, enter
the start and end times with the numeric keys.
Protecting the childlock settings with a code
• Use the cursor control key to open the file card
„Code input“ and press the „OK“ key. In
the setting window, enter your personal
code with the numeric keys.
Make a note of the code, since the
childlock can be switched off only
by entering it again!
• Press the „OK“ key to save the code.
• Press the „TV“ key to close the menu.
• Switch off the TV set with the key.
The childlock is activated only
when the TV set is switched off.
Deactivating the childlock
If the childlock is active, this is indicated by the
display of a message when you switch the TV set
on. If you then enter the correct code, the child-
lock is temporarily deactivated and the TV set can
be operated „normally“ as long as it remains
switched on. If you wish to permanently deactiva-
te the childlock, proceed as follows:
• Press the „MENU“ key to open the TV menu.
• Press the green key to open the menu
„Timer“.
• Use the cursor control key to select „Childlock“
and press the „OK“ key.
• In the setting window, use the -+key to set the
childlock to „Inactive“.
• Press the „OK“ key to save the new setting.
☞
☞
Time settings
Timer control
Reminder*
Childlock
Code ** * *
Picture-Volume
AV devices
Station table
Timer
Configuration
End viewing time*
Start viewing time*
Code input
Permitted programmes*
Childlock
TV-Menü
Timer
: select
menu item
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.