45
The EPG function can be switched on by pressing
the keys "F3" and if an EPG programme posi-
tion is defined in the menu (see below).
On all programme positions where NexTView is
received, the TV set displays the following messa-
ge after a short delay:
This station is sending NexTView (EPG). Save it as
the EPG programme position?
• Yes • No
The TV set is asking you whether you want to use
this programme position for collecting the data for
the EPG NexTView.
Press the red key for "No" - this pro-
gramme position is not used for recei-
ving the NexTView data. The message is
still displayed for all other programme
positions where NexTView data are
received.
Press the green key for "Yes" - this pro-
gramme position will be used for recei-
ving the NexTView data. The message is
then not displayed for other programme
positions where NexTView data are
received.
If you know the programme position for a
NexTView station, you can also enter its number
directly on the numeric keys.
You can overwrite any existing programme posi-
tion number or delete the number by pressing the
II key.
23.1 Activating the EPG NexTView
Call the menu
OK
OK
Operation
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Language*
EPG on
EPG prog.position 6 RTL 2
Now showing on
Picture-Volume
AV devices
Station table
Timer
EPGsettings
Automatic zoom
Init. prog. position
Display configuration
TV-Menü
Configuration
: select menu
item
MENU
F3
2
Not possible with an external satellite receiver!
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
  