RETAINER
CENTER
RETAINER
REAR BAR
RETAINER
LEFT FRONT BAR
RIGHT FRONT BAR (NOTE LONG SHAFT ON FRONT)
REAR FRAME | HANDLE |
LOCKNUTS | GEARS |
FRONT FRAME |
|
FIGURE 16 INSTALL OPTIONAL SHAKER GRATE FOR MODEL 526
INSTALL FIREBRICK
Place firebrick into unit as follows:
1.Place two longer bricks with bevel cuts against the rear wall of the firebox. See figure 17.
2.Place remaining two bricks with bevel cuts against the front wall of firebox.
3.Place rectangular brick along side walls of firebrick as illustrated. If Rectangular bricks are two different widths, then an equal number of each will go on both sides of firebox.
| BEVEL CUT BRICKS |
RECTANGULAR | FRONT & BACK |
BRICKS ON |
|
SIDES |
|
MODELS 2900/4000
INSTALL OPTIONAL CATALYTIC COMBUSTOR (MODEL 2900/4000)
NOTE: Optional catalyst not recommended with 6" flue adapter. Smoke spillage may occur out of door when refueling.
RECTANGULAR BRICKS ON SIDES
BEVEL CUT BRICKS FRONT & BACK
Greater efficiency can be obtained when burning wood by use of a catalytic combustor. In addition, it will de- crease the accumulation of creosote and diminish the possibility of a chimney fire.
MODEL 526
FIGURE 17 INSTALL FIREBRICK
22
