Meyer 7200 manual Auger Drive First Reduction, 14-0031, Model

AUGER DRIVE FIRST REDUCTION

KEY	PART NO.	DESCRIPTION
1	14-0031	2" Bearing 4-Bolt
2	851-2520-2Z	1/4-20 x 2" Grade 5
		Shear Bolt
3	910-0058	2" Shear Sprocket
		Weldment
4	815-2520-Z	1/4-20 Nylon Insert
		Locknut
5	910-0054	Shear Sprocket Assembly
		(1000 RPM)
	910-0066	Shear Sprocket Assembly
		(540 RPM)
5A	913-3602-2	2" I.D. x 2-1/4" O.D. x 2"
		Bronze Bushing
6	808-2-3-14	2" I.D. x 3" O.D. x 14 Ga.
		Machine Bushing
7	933-3702	2" Retaining Ring
8	925-3717-3	3/4-10 x 2" Machine Bolt -
		Special
9	808-.75-1.25-14	3/4" I.D. x 1-1/4" O.D. x
		14 Ga. Machine Bushing
10	912-0012	1-3/8" Nylon Roller Com-
		plete
10A	912-0012-1	1-3/8" Nylon Roller Only
10B	912-0012-2	Inner Sleeve
11	925-3717	Tightener Arm Assembly
		(1000 RPM)
	925-3739	Tightener Arm Assembly
		(540 RPM)
12	38-0013	5/16 x 1-3/4" Roll Pin
13	911-0060	#80-93 Pitch Chain (1000
		RPM)
	911-0061	#80-79 Pitch Chain (540
		RPM)
14	929-0003	Extension Spring
15	925-3822-6	2-Chain Link For Tight-
		ener(Prior To SN
		SI067200252)
16	933-3804	Eyebolt, 5/16 x 5" / 4"
		Thread Length
17	813-3118-Z	5/16" Regular Nut
18	914-3602	1-1/2" Bearing, 4-Bolt

KEY	PART NO.	DESCRIPTION
19	910-0039	80B22 Sprocket 1-1/2"
		Bore, 3/8" Keyway-10
		RPM Auger Speed
	910-0015	80B18 Sprocket 1-1/2"
		Bore, 3/8" Keyway-8 RPM
		Auger Speed
	910-0077	80B28 Sprocket 1-1/2"
		Bore, 3/8" Keyway-13
		RPM Auger Speed (Stan-
		dard)
	910-0036	80B24 Sprocket 1-1/2"
		Bore, 3/8" Keyway-11
		RPM Auger Speed
20	925-3601	Front Bearing Plate
21	931-3810	CV/OR PTO Shield As-
		sembly
22	901-3750-71	Rear Bearing Back Mount
		Plate
23	933-3625	Copper Tube Grease Line
		55" (Includes zerks, fit-
		tings)
24	933-3627	Copper Tube Grease Line
		12" (Includes zerks, fit-
		tings)
25	923-3711	1-1/2" Input Drive Shaft /
		Splined
26	35-0010	3/8 x 3/8 x 1-1/2"" Square
		Key
27	933-3634	Copper Tube Grease Line
		38" (Includes zerks, fit-
		tings)
28	901-3750-72	Rear Bearing End Plate
		Assembly
29	30-0006	1/8" NPT x 90 Degree
		Zerk
30	30-0009	1/8" NPT Coupler
31	30-0016	1/8" NPT Close Nipple
32	910-0090	Reduction Sprocket
		Weldment-Nonshear For
		1000 RPM
		(Serial #SI067200201 &
		Later)
	910-0091	Reduction Sprocket
		Weldment-Nonshear For
		540 RPM
		(Serial #SI067200201 &
		Later)

Model 7200 -31-