3. Operation
3.4 Personalisation (optional)
Function
Personalisation parameters can be set and modified using the "UPS Driver" software installed on a computer that is connected to the UPS (see section 2.3 Connection to the RS 232 (or USB) communications port).
Check that the RS 232 25 or USB 26 cable is properly connected.
"UPS Driver" installation:
1 - Insert the "UPS Driver" diskette in the drive of a PC running Windows. 2 - Select the disk drive (A:\).
3 -
Once "UPS Driver" has been installed, UPS parameters can be modified in a window containing a number of tabs, each presenting a set of parameters.
"ON / OFF conditions" tab
Personalisable function | Default setting | Options |
|
|
|
Automatic start | Enabled | Disabled |
|
|
|
Cold start (battery power) | Enabled | Disabled |
|
|
|
Forced shutdown | Enabled | Disabled |
|
|
|
Sleep mode | Disabled | Enabled |
|
|
|
UPS ON / OFF via software | Enabled | Disabled |
|
|
|
"Battery" tab
Personalisable function | Default setting | Options |
|
|
|
|
| Once a week |
Automatic "Battery test" intervals | Every day | Once a month |
|
| No test |
|
|
|
20% remaining battery backup time | 40% remaining battery backup time | |
|
|
|
Page 22 - 51031998EN/AA
