Inverter, Static bypass, Efficiency | MGE UPS Systems 6000 guide

* Power rating for an N+1 redundant configuration

Inverter
Three-phase output voltage with neutral			Volts	yes

adjustable	± 3 %			yes

Steady-state conditions	± 1%			yes

Voltage transients	± 3% (load from 0 to 100 or 100 to 0 %)			yes

Output voltage distortion at Pn	THDU ph-N < 4% for linear loads			yes

	THDU ph-N < 4% for non-linear loads			yes

Output frequency			Hz	yes

Variation in output frequency	± 0.5 Hz			yes

adjustable	± 0.25 Hz to 2 Hz			yes

Frequency synchronisation with an external	± 8 % of rated frequency			yes

source				yes
Overload capacity	125%	In for 10 minutes

	165%	In for 1 minute		yes

Current limiting	233%	In for 150 milliseconds		yes

Crest factor	up to 3:1			yes

no no no no no no no no

non no

no no no no

Static bypass

Static bypass		yes
Short-circuit withstand of static bypass	depending on power	yes
Maintenance bypass		yes

no no

Normal mode

> 95% at Pn, > 92 % at Pn/2

yes

Graphic display 15 languages	selection of operating language	yes
personalisation menu	with password	yes
display	measurements, status, events, graphs	yes
event log	Time-stamping 2000 events	yes
Controls	ON, OFF, EPO terminal block	yes
Status indications with mimic panel	Audio alarm, LEDs	yes

no no no no no no

APC By Schneider Electric

Edition - 03/2009

Spec. E - 19