MGETM GalaxyTM 6000 : Specification guide Parallel UPS,
* Power rating for an N+1 redundant configuration
Contents
1 - UPS definition | ||
1.1 | - Purpose | |
1.2 | - Brief description | |
2 - Operating principle | ||
2.1 | - Normal operation | |
2.2 | - Operation on battery power | |
2.3 | - Battery recharge | |
2.4 | - Parallel operation with redundancy | |
2.4 | - Transfer to bypass AC source | |
2.5 | - UPS maintenance | |
2.6 | - Battery maintenance | |
2.7 | - Cold start (AC power absent) | |
3 - Sizing and general characteristics | ||
3.1 | - Technology | |
3.2 | - Rating | |
3.3 | - Battery backup time | |
3.4 | - Types of loads accepted | |
3.5 | - Limitation of harmonics upstream of the UPS | |
3.6 | - Efficiency | |
3.7 | - Noise level | |
4 - AC sources | ||
4.1 | - Normal AC source | |
4.2 | - Bypass AC source | |
5 - Electrical characteristics | ||
5.1 | - Rectifier and charger | |
5.2 | - Batteries | |
5.3 | - Inverter | |
5.4 | - Static bypass | |
5.5 | - Discrimination and short circuit capacity | |
5.6 | - System earthing arrangement | |
6 - Mechanical characteristics | ||
6.1 | - Mechanical structure | |
6.2 | - Modular design | |
6.3 | - Dimensions | |
6.4 | - Connections | |
6.5 | - Ventilation | |
6.6 | - Safety | |
7 - Environment conditions | ||
7.1 | - UPS (not including battery) | |
8 - Protection | ||
8.1 | - UPS | |
8.2 | - Rectifier/chargers | |
8.3 | - Inverters | |
8.4 | - Batteries | |
9 - Battery management | ||
9.1 | – | |
9.2 | - Measurement of actual backup time | |
9.3 | - Digital battery management | |
9.4 | - Block by block monitoring | |
10 - User interface and communication | ||
10.1 - User interface | ||
10.2 - Communication | ||
11 - Maintainability | ||
11.1 - Local and remote diagnostics and monitoring - E. Services | ||
12 - Standards and tests | ||
12.1 - Standards | ||
12.2 - Certification of conformity | ||
13 - Test procedures and quality system | ||
13.1 - Test procedures | ||
13.2 - Quality system | ||
14 - Services | ||
14.1 - Maintenance | ||
14.2 - Technical competency | ||
14.3 - Functional components | ||
14.4 - System | ||
14.5 - Replacement parts | ||
14.6 - Recycling and renovation | ||
15 - Warranty | ||
16 - Installation services | ||
17 - Electrical diagram | ||
Appendix. Comparison table | ||
APC By Schneider Electric | Edition - 03/2009 | Spec. E - 2 |
