BluRay Series | MICROBOARDS TECHNOLOGY, LLC |
Registering Data to the Hard Drive (HDD)
When registering data to a partition on the internal hard drive, you do have the option of recording to the blank media as well. In the SETUP menu, go to “Copy DISC to HD/DISC” and change the setting from OFF to ON. This will allow the data from the master disc to be copied to the internal hard drive, as well as any blank discs you have in the recorders. See page 12 for a description of the SETUP menu.
1.At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display shows MASTER SELECT? (DISC TO DISC)
MASTER SELECT? (DISC to DISC)
2.Place the Master disc into the Reader drive.
3.Press the YES button
4.The display will show:
READER? (DISC to DISC)
5.Press the NO or ▼ button
6.The display will now show:
HDD1?
(DISC to HDD)
7.If you wish to copy the data to the 1st partition, press the YES button.
8.If you wish to select another partition, press the NO or ▼ button.
HDD1?
(DISC to HDD)
9.By continuing to press the NO or ▼ button, you will scroll through the different HDD partitions. Once you are at the partition you wish to use, press the YES button.
10.The display will now show the progress of the data being transferred to the hard drive:
REGISTER |
|
| 22.4GB | ||
BDROM |
|
|
|
| 25% |
11.Once the Master disc has been copied to the HDD, the Reader drive will eject the disc. When you go back into the MASTER SELECT? Menu, and select a partition with data stored on it, the display will show the type of data (ROM or Video) and the capacity of that data. Proceed to COPY HDD TO DISC section.
9
