MicroBoards Technology LightScribe Series user manual Error status in Track Extraction

COPY TO HDD OK?

NEXT MASTER?

END EXTRACTION?

EXTRACTION OK?

DVD Premium Pro LightScribe Series MICROBOARDS TECHNOLOGY, LLC

Track Extraction

When extracting tracks to the internal hard drive, the DVD Premium Pro Series will use the next available partition space on the hard drive. Like any time a master is registered to the hard drive, you have the ability to name the partition.

1.At the COPY START? Menu, press the NO or ▼ button until the display reads:

Press the YES button.

2.Press YES again in the following screen.

Trk EXTRACTION? (CDtoHDD)

3. Once the analysis of the master completes, you will
need to name the disc image.
If you do not have the Auto Generate in the Setup menu	NAME?	79:28
feature turned on, use the ▲or ▼buttons to change the	(_	)
character in the position shown by the cursor. Press the

YES button to move the cursor to the right or NO to move back to the left. Once the cursor is on the 14th character, press YES to begin registering the master. Insert a master audio disc into the reader drive. The duplicator will analyze the master disc.

4.Next, it displays Selected Track Number / Total Track Number. This master data has total 12 tracks.

EXTRACT THE Trk?	Press NO or ▼ to skip forward a track.
	Press YES to select the track you want to
TRK 01/12
	extract.

5. If you skip forward all tracks, it asks if you want to end extraction for the master data. Press YES to finish extraction and register selected tracks in HDD.

Press NO or ▼ to add more tracks from this master data.

6. If you press YES in step 5, the display asks you to register the extracted tracks in HDD.

Press YES to start registration.

7. After registration completes, decide if you want to extract more tracks from other master audio discs.

Press YES to extract more tracks from other master audio discs.

Press NO to complete extraction.

8.If you press NO, the changes back to the COPY menu so that you can copy the extracted tracks in HDD to blank CD-R media.

Error status in Track Extraction:

In the following situation in TRACK EXTRACTION, the display shows an error status on the LCD.

1.If you try to extract a track which is not CD-DA, the track number does not display properly, showing “—“. Pressing the YES button will not add the track.

2.If the total time of extracted audio tracks is over 80 minutes or 99 tracks have already been selected, the display will read OVER. Pressing the YES button will not add the track.

EXTRACT THE Trk? --/12

EXTRACT THE Trk?

06/12OVER

15