5 monitoring.

The Broadband Network Utility

The Microsoft® Broadband Network Utility is automatically
installed on your computer when you install the Setup software.
Use it to check the status of your network or change your network
settings. The Broadband Network Utility also shows the devices
currently connected on your network.
This chapter describes how to:
OView computer, network connection, and Internet connection
status.
OView and change network settings.
OUpdate network software, drivers, and firmware.
To open the Broadband Network Utility, do one of the following:
ODouble-click the Broadband Network Utility icon in the
Windows notification area of the tray.
OClick Start, point to Programs, and then click Microsoft
Broadband Network Utility.
Your Internet
Connection Status
Your Network Status
(This page will look different
if your network does not
use a base station.)
Your Computer Status
Status of all computers and
devices in your workgroup