Microsoft System Board, IBUS-BAT-1370 manual Jumper Settings for Clearing Cmos Data

Hardware Installation

Jumper JP2’s settings are shown below.

1

2

3

1

2

3

1

2

3

1-2 On: Auto	2-3 On: 66MHz	1-2-3 Off: 100MHz
(default)

2.5 Jumper Settings for Clearing CMOS Data

Jumper JP6

Clear CMOS Data

If, for some reason, the CMOS data becomes corrupted or you forgot the supervisor/user/

keyboard password, the system can be reconfigured

with the default values stored in the ROM BIOS. To load the

default values, power off your

system and unplug the power cord. If you are using an AT power supply, you do not

need to unplug the power

cord. Set JP6 pins 2 and 3 to On. Wait for a few seconds and set JP6 back to its default setting, pins 1 and 2 On. You may now plug the power cord and power-on your system.

1

2

3

1

2

3

1-2 On: Normal	2-3 On:
(default)	Clear CMOS Data

16