!Award BIOS Setup Utility

Month)” field, the time set in this field must be later than the time of the RTC set in the Standard CMOS Setup.

3.1.5 PNP/PCI Configuration

This section describes configuring the PCI bus system. It covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

ROM PCI/ISA BIOS

PNP/PCI CONFIGURATION

AWARD SOFTWARE, INC.

 

 

 

 

 

 

 

 

 

 

 

 

Resources Controlled By

: Auto

Assign IRQ for VGA :

Enabled

 

 

 

Reset Configuration Data

: Disabled

Assign IRQ for USB

:

Enabled

 

 

 

 

 

PCI Slot 1 Use IRQ

:

Auto

 

 

 

 

 

 

PCI Slot 2 Use IRQ

:

Auto

 

 

 

 

 

 

PCI Slot 3 Use IRQ

:

Auto

 

 

 

 

 

 

PCI Slot 4 Use IRQ

:

Auto

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ESC

:

Quit

↑ ↓ → ←

 

:

Select Item

 

 

 

 

F1

:

Help

PU/PD/+/-

:

Modify

 

 

 

 

F5

:

Old Values

(Shift) F2

:

Color

 

 

 

 

F6

:

Load Fail-Safe Settings

 

 

 

 

 

 

F7

:

Load Optimal Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The settings on the screen are for reference only. Your version may not be identical to this one.

Resources Controlled By

The Award Plug and Play BIOS has the capability to automatically configure all of the boot and Plug and Play compatible devices.

Auto The system will automatically detect the settings for you. The categories that follow will not be shown on the screen.

Manual This will allow you to set the IRQ/DMA (you have assigned your add-in card) to Legacy ISA or PCI/ISA PnP. For non-PnP ISA cards, select Legacy ISA. For PnP ISA or PCI cards, select PCI/ISA PnP.

Reset Configuration Data

Enabled The BIOS will reset the configuration data once automatically. It will then recreate a new set of configuration data.

Disabled The BIOS will not reset the configuration data.

46

Page 46
Image 46
Microsoft System Board, IBUS-BAT-1370 manual 5 PNP/PCI Configuration, Resources Controlled By, Reset Configuration Data