ENGLISH
C. OPERATION
1.TO PROGRAM A NEW PRESET MENU SELECTION:
2.TO TEMPORARILY OVERRIDE A PRE- SET MENU SELEC- TION:
3.TO CHOOSE A PRE- SET MENU SELEC- TION:
Perform the procedure in Part E, Programming Preset Menu Selections, in this Section. At least one menu selection MUST be programmed before the oven can be operated.
Perform the procedure in Part E, Programming Preset Menu Selections, BUT press 
instead
of (in Steps 3 and 8). Instead of permanently overwriting the menu selection, the new set temperature and cook time settings are only temporary. To cancel the temporary menu selection, press any preset menu key or disconnect electrical power to the oven.
a.Press 
(or any other preset menu key). The display will read 
. The number in the display (“1” is shown above) will match the menu key that was pressed
b.Wait for the 
light to illuminate. The light will illuminate after both heating zones reach their set temperatures.
c.Load the product onto the conveyor.
4.TO COOK A SINGLE PIZZA, OR THE LAST OF A GROUP OF PIZ- ZAS:
5.TO VIEW THE SET TEMPERATURES:
6.TO VIEW HEATING ZONE REFERENCE TEMPERATURES:
7.TO VIEW THE COOK TIME:
a.Choose a preset menu selection, and wait for the 
light to illuminate.
b.Press 
. 
and 
will alternate in the display. The number in the display (“1” is shown above) will match the current menu selection
c.Load the pizza product onto the conveyor.
IMPORTANT
After 1/2 of the cook time has elapsed, the temperature of the top zone will be automatically lowered. After the entire cook time has elapsed, the program will return to its normal top zone temperature.
After 
is pressed, the menu selection cannot be changed until the cook time has elapsed.
Press either 
or 
. The top or bottom set temperature will be displayed for 5 seconds.
Press 
+ 
or 
+ 
. The top or bottom reference temperature will be displayed for 5 seconds.
Press 
. The cook time will be displayed for 5 seconds.
D. SHUTDOWN PROCEDURE
1.Switch the Power On/Off (I/O) switch to the OFF (“O”) position.
2.Wait for the oven’s cooling fan to turn off.
3.Disconnect electrical power to the oven at the circuit breaker/fused disconnect.
6
