7.Using a flathead screwdriver, loosen the hose clamps attaching the condensation drain hose to the quick disconnect on the HEX unit face plate.

NOTE: You might need to cut the condensation drain hose to remove it from the barbs.

8.Remove the condensation drain hose from both barbs.

NOTE: Depending on the style of the hose barb, you might need to remove the hose barb before you remove the quick disconnect. If the hose barb is chrome-plated, remove it before you remove the quick disconnect.

9.Using a small pipe wrench and an adjustable wrench, remove the quick disconnect by loosening the large nut inside the quick disconnect faceplate.

Upgrading procedures 125