2.Using a T-25 Torx driver, remove the four screws securing the upper and lower electromagnetic lock brackets to the rack chassis.

3.Using an Allen wrench, remove the two black cap screws securing each electromagnetic lock to its electromagnetic lock bracket.

4.Remove the electromagnetic locks and cables from the rack.

To replace this component, see "Replacing the rear automatic door release (on page 42)."

Replacing the rear automatic door release

1.Align the electromagnetic locks to the electromagnetic lock brackets.

Removal and replacement procedures 42

Page 41 Page 43
Page 42
Image 42
HP 403349-003 manual Replacing the rear automatic door release
Page 41 Page 43
Top Page Image Contents