You can replace the fan units during operation.

The following tools are required for installation:

•T-25 Torx driver

Removing the fan unit

1.Open the rear MCS door.

NOTE: The number of horizontal brackets varies depending on the position of the fan unit (top, middle, or bottom).

2.Using a T-25 Torx driver, remove the four Torx screws securing the horizontal shipping bracket to the MCS frame.

Removal and replacement procedures 51

Page 50 Page 52
Page 51
Image 51
HP 403349-003 manual Removing the fan unit
Page 50 Page 52
Top Page Image Contents