2.Using an Allen wrench, insert and tighten two black cap screws to secure each electromagnetic lock to its electromagnetic lock bracket.

3.Install the top electromagnetic lock bracket to the rack chassis in the location you noted during removal.

a.Align the electromagnetic lock assembly to the rack chassis in the location you noted during removal.

b.Using a T-25 Torx driver, insert and tighten two M5.5 self-tapping screws into the inner row of rack holes to secure the electromagnetic lock assembly to the rack chassis.

4.Repeat step 3 for the bottom electromagnetic lock bracket.

Removal and replacement procedures 43

Page 43
Image 43
HP 403349-003 manual Removal and replacement procedures