
Removal and replacement procedures
Removal and replacement procedure overview
This section provides guidance for removing and replacing the HP Modular Cooling System (MCS) spare parts.
Follow the instructions carefully to ensure proper installation of the new spare part.
IMPORTANT: As you are removing the HP Modular Cooling System components, be sure to retain the screws in a safe place and separate them according to their type.
Viewing the spare replacement video
Because of the difficulty of removing and replacing spare parts, HP recommends watching the HP Modular Cooling System Spare Replacement video. This video provides further explanation and detail of replacement strategies and techniques that might be helpful when attempting to remove and replace spare parts. You can access the video on the HP website (http://www.hp.com/go/mcs).
1.Select HP Modular Cooling System.
2.Under Related Links, select HP Support and Drivers.
3.Select HP Modular Cooling System.
4.Under Resources for Modular Cooling System, select Customer self repair steps (videos/animations).
5.Select Remove/Replace Videos.
6.Select the appropriate spare part from the list on the
Customer self repair required tools
The following tools are required for each spares kit removal and replacement procedures:
•AC transfer switch o
o Small Flathead screwdriver
•Air bleeder valve
o
o Water hose fitting wrench (included with your original MCS unit) o Counter hold wrench (included with your original MCS unit)
•Automatic door release o
Removal and replacement procedures 22