Middleby Marshall PS624E installation manual Measuring Conveyor Speed, See Figures 3-4

E. Conveyor

The on-off switch for the conveyor motor is on the control panel. Also on the control panel is the digital conveyor speed control. The digital control can be adjusted from 30 seconds to 12 minutes bake time (conveyor speed). Refer to Figure 3-3.

Conveyor speed is measured by the amount of time it takes for an item to go through the bake chamber of the oven.

MEASURING CONVEYOR SPEED.

See Figures 3-4 and 3-5.

To check conveyor speed, place a product item at the entrance end of baking chamber as shown. Time how long it takes for the leading edge of the item to go from the entrance end of the baking chamber to the exit end. This should be the conveyor speed shown on the conveyor speed digital control.

NOTE: In Figures 3-4 and 3-5, the oven shown is with the conveyor running right to left.

WARNING

Possibility of injury from rotating parts and electrical shock exist in this oven.

Never disassemble or clean the oven with the blower switch or any other part of the oven turned “ON” or “I”. Turn “OFF” or “O” and lockout or tagout all electrical power to the oven before attempting to clean or service this oven.

SECTION 3

OPERATION

Figure 3-3. Conveyor Speed Digital Control

Figure 3-4. Product at entrance end of baking

chamber – BEGINNING OF TIMING

Figure 3-5. Product at exit end of baking

chamber – END OF TIMING

17