Middleby Marshall PS624E Section Troubleshooting, Problem Products Are Overcooked Or Undercooked

SECTION 5

TROUBLESHOOTING

SECTION 5

TROUBLESHOOTING

PROBLEM:

PRODUCTS ARE OVERCOOKED

OR UNDERCOOKED

PROBLEM:

OVEN BLOWER AND CONVEYOR

OPERATE, YET THE OVEN IS NOT HEATING

Check for correct setting of conveyor speed control.

Set the conveyor speed control at correct setting.

Check for correct

setting on tempera-

ture controller.

Turn temperature control to correct setting.

Reset the temperature controller to a new setting (above 200°F), after turning the BLOWER switch to off for 30 seconds.

Start the oven again. If the oven still does not heat, call your Middleby Marshall Service Agency.

Verify the food

preparation process.

If products still cook incorrectly,

call your Middleby Marshall

Service Agency.

PROBLEM:

OVEN DOES NOT HEAT

Check to see if both BLOWER switch and HEAT switch are in the “ON” or “I” position.

If oven does not heat, call your

Middleby Marshall Service Agency.

PROBLEM:

CONVEYOR WILL NOT HOLD PROPER

SPEED OR WILL NOT RUN AT ALL

Check whether the conveyor is jammed on something in oven.

Check for proper tension of conveyor drive chain and conveyor belt. Refer to Section 4 for correct procedure.

Check that the conveyor

drive sprocket is tight.

If conveyor still does not run correctly, contact

your Middleby Marshall Service Agency.

PROBLEM:

BLOWER MOTOR IS RUNNING, YET LITTLE OR NO AIR BLOWS FROM AIR FINGERS

Air fingers reassembled incorrectly,

after cleaning.

Assemble air fingers correctly, after cleaning. Refer to Section 4 procedure, or call your Middleby Marshall Service Agency.

PROBLEM:

OVEN DOES NOT TURN ON WHEN ITS

SWITCHES ARE TURNED ON

Check that all electric supply switches are set to the “ON” or “I” position. Then, start the oven.

If oven still will not start, contact your Middleby

Marshall Service Agency.

37